HP Compaq Business PC Maintenance and Service Guide Elite 8300 Series Convertible Minitower Elite 8300 Series Microtower Elite 8300 Series Small Form Factor Elite 8300 Series Ultra-Slim Desktop

10. To remove the front antenna, from the inside of the front of the chassis, remove the antenna
from the clips built into the base pan.
Figure 9-39 Removing the front antenna – inside
11. From the outside of the front of the chassis, remove the two Torx T8 screws (1) that secure the
antenna to the chassis.
12. Pull the antenna out of the clips on the front of the chassis (2), and then pull the antenna out of
the hole it routes through (3).
Figure 9-40 Removing the front antenna – outside
Antennas 245