Setting up and configuring Intel AMT in HP Business Notebooks, Desktops, and Workstations - White Paper

15
13. Review the Password Policy setting shown in the Intel AMT Configuration screen.
This setting specifies when it is possible to change the MEBx password over the network.
Note
The MEBx password can always be changed locally through the MEBx user interface.
As shown in Figure 10, options are:
– Default Password Only
You can change the MEBx password via the network interface if the default password has not yet been changed.
– During Setup and Configuration
You can change the MEBx password via the network interface during the setup and configuration process but at no
other time. Once setup and configuration is complete, the password cannot be changed via the network interface.
– Anytime (recommended; default setting)
You can change the MEBx password via the network interface at any time.
Figure 10. Setting the password policy