F10 Setup overview for 2012 HP Business Notebooks and Desktops 2012 Business PC Models Technical white paper
8 
Feature 
Function 
Default Setting, 
if applicable 
 Intel Rapid Start Technology 
Enables Intel Rapid Start Technology, which improves battery 
life and system resume time above the current Standby and 
Hibernate levels. 
 This option operates only when an SSD is detected and is 
currently supported only in mSATA SSD-based solutions. 
Disabled 
 Entry on S3 RTC wake 
Enables RTC wake to trigger the transition from S3 to Intel 
Rapid Start Technology 
Disabled 
 S3 Wake Timer 
Specifies the length of time the system remains in S3 before 
an RTC wake event is triggered 
5 minutes 
 Entry on S3 Critical Battery wake 
event 
Enables critical battery event support on Intel Rapid Start 
Technology. 
Disabled 
 Express Card Link Speed 
Sets speed for Express Card Link 
Generation 2 
 Dynamic Platform and Thermal 
Framework (DPTF) 6.0 
Allows users to set maximum power consumption on select 
Intel platforms 
Enabled 
 Configurable TDP
7
 Lock 
Thermal Design Power (TDP) Locks power consumption to a 
nominal value on select Intel platforms 
Disabled 
 LPM 
Uses Low Power Mode (LPM) setting requested by OS 
OS specific 
 Configurable TDP Boot Mode 
Allows the user to select the default power consumption on 
select Intel platforms 
TDP Down 
 Smart Card Reader Power Setting 
Disables the power-saving feature of the Smart Card reader. 
Used to maintain a session when the card is removed. 
Powered on if 
card is present 
 Power Control 
Allows the scheduling of a peak shift period and a battery 
charging period 
Enabled 
 Power on unit when AC is detected 
Turns on the unit when AC power is applied 
Disabled 
 Deep Sleep 
Turns off power to the chipset during Sleep, resulting in 
greater battery life 
Off, On, Auto 
Built-In Device Options
8
 Wireless Button State 
Enables the wireless button 
Enabled 
 Embedded WLAN Device 
Enables an integrated 802.11 device 
Enabled 
 Embedded WWAN Device 
Enables an integrated WWAN device 
Enabled 
 WWAN Quick Connect 
Maintains power to the WWAN device to provide faster 
network connection  
Enabled 
 Embedded GPS Device 
Enables integrated GPS device 
Enabled 
 Embedded Bluetooth 
Enables integrated Bluetooth device 
Enabled 
 Embedded LAN Controller 
Enables integrated NIC device 
Enabled 
 LAN/WLAN Switching 
Enables automatic switching 
Disabled 
 Wake on LAN 
Enables system to wake when a magic packet is received via 
LAN 
Boot to Network 
 Wake on LAN in Battery/DC Mode 
Enables system to wake up when powered by battery via LAN 
Disabled 
 Notebook mSATA Drive 
Enables the mSATA Drive and allows you to use an mSATA 
drive as a bootable drive. 
Enabled 
 NB Upgrade Bay 
Enables integrated Upgrade Bay 
Enabled 
 Fingerprint Device 
Enables fingerprint reader 
Enabled 
7
 Thermal Design Power (TDP) 
8
 Device not supported on all platforms 










