Preparing Advanced Format hard drives for Microsoft Windows installations on HP Business Notebook PCs, Workstations, and Desktop PCs

Using WMIC

1. After the operating system has been installed, run wmic from the Windows command line.

2. At the resulting prompt, type partition list full to display information about system partitions.

3. Identify the offset value of each partition and divide by 4096. If the value is exactly divisible, the

partition is aligned.

Using DiskPart

1. Boot the system to WinPE 2.1 or later.

2. Execute the DiskPart utility to display information about specific system partitions.

For example, use the following script is to display information about Disk 0, Partition 1 (as shown

in Figure 4):

diskpart

select disk 0

select partition 1

detail partition

Figure 4.Sample script output

Partition 1

Type : 07

Hidden: No

Active: No

Offset in Bytes:1048576

Volume ### Ltr Label Fs Type Size Status Info

---------- --- ----------- ----- ---------- ------- --------- ------

* Volume 1 NTFS Partition 9 GB Healthy

3. Divide the offset value of the selected partition by 4096. If exactly divisible, the partition is

aligned.