Setting up and configuring Intel AMT in HP Business Notebooks, Desktops, and Workstations - White Paper

11
7. Select the appropriate Idle Timeout value for Wake-On-ME in minutes, as shown in Figure 6.
– Idle Timeout: 65535 (Recommended setting; default)
The timeout must be set to a non-zero value for the ME to take advantage of Wake-On-ME.
The timeout is not used when the system is in active state (S0); it is only used when the ME ON in Host Sleep States
setting is configured to allow Wake-On-ME.
Figure 6. Selecting the Idle Timeout value
8. Return to the MEBx Main Menu (Figure 1).
9. Select Configure Intel AMT.