User's Manual

To access HP Asset Viewer:
1. Tap Start > Settings > System > HP Asset Viewer.
2. To view additional system information, tap the appropriate tabs.
●
The Identity tab – displays the serial number and the user information.
●
The Memory tab – displays the device memory size for ROM and RAM on your HP iPAQ. It
also displays information about the ROM flash, flash chip type, flash block size, and PSM
driver version.
●
The Version tab – displays the product revision level, ROM date, ROM revision, OS version,
BootLoader version, and XIP version.
●
The Display tab – displays settings, such as screen color, horizontal pixels, vertical pixels,
color depth, display type, and panel ID.
●
The System tab – displays information about the manufacturer, product ID, model ID,
processor type, processor revision, language, country ID, and UUID.
●
The Camera tab – displays camera details, such as the module installed, hardware revision,
hardware and software driver versions, software version, camera API interface version, and
camera information.
●
The Keyboard tab – displays information about the module present, firmware version,
hardware revision, driver version, and software version.
●
The Bluetooth tab – displays information about radio present, firmware version, hardware
revision, driver version, software version, and MAC address.
●
The Wi-Fi tab – displays information about radio present, firmware version, hardware revision,
driver version, software version, IP address, and MAC address.
●
The GSM tab – displays information about radio present, radio firmware version, and IMEI
number.
●
The GPS tab – displays information about the GPS present, status, manufacturer, revision
level, driver version, firmware version, and software version.
●
The Extended ROM tab – displays details about the HP iPAQ customization software that
resides on the extended ROM (not applicable to all devices).
HP iPAQ DataConnect
The first time you use your SIM card, HP iPAQ DataConnect automatically detects the phone network
and operator and sets up the GPRS connection information for you. However, if your service provider
offers different subscription types, then HP iPAQ DataConnect will show a window on your screen that
list the different subscriptions available. You need to select your subscription and tap Select for HP iPAQ
DataConnect to automatically set up the mobile network connection parameters. In any case, you can
change these settings to suit your preference or create your own network settings.
To configure the data settings manually:
1. Tap Start > Settings > Connections > HP iPAQ DataConnect.
2. Select a country and operator, and then tap Select to configure the network settings for the selected
operator.
3. The data settings will be retrieved each time you try to connect to the Internet using GPRS.
CAUTION: Do not edit network parameters unless you are being assisted by your service provider.
92 Chapter 15 Applications