User's Manual
Table Of Contents
- Get started with your HP iPAQ
- The Today screen
- Launch Getting Started
- Status icons
- Use the touch screen display
- Use shortcut menus
- Use the 5‑way optical navigation
- Use the main buttons on the HP iPAQ
- Use the on‑screen keyboard
- Know your device
- Customize your HP iPAQ
- Create a device name
- Specify owner information
- Change the regional settings
- Adjust the volume settings
- Adjust the ring tone and notification sounds
- Use the ringer/sound switch
- Customize screen settings
- Change the power management settings
- Adjust the brightness settings
- Connect to a computer
- Install and remove programs
- Set alarms and clocks
- Display the clock in the title bar
- Customize the shortcut key
- Adjust the speed for scrolling through items in a list
- Use the proximity sensor
- Protect your HP iPAQ with a password
- Use HP iPAQ Key Guard
- Use the device lock
- Battery‑saving tips
- Power Save Mode
- Use your HP iPAQ
- Check connection and signal strength
- Call features
- Call history
- Change the SIM PIN
- Change service settings
- Supported frequency bands
- Configure channels
▲
Slide the ringer/sound switch towards the right for the vibrate mode.
To disable the vibrate mode:
▲
Slide the ringer/sound switch towards the left for the normal mode.
Customize screen settings
You can customize your HP iPAQ screen settings. Change the screen orientation, correct screen tap
and alignment problems, soften the fonts, and adjust the text size to suit your requirements.
NOTE: Your screen orientation automatically switches to the landscape view when you slide out the
keyboard. It also automatically switches to the portrait view when you close the keyboard.
To change screen orientation:
1. Tap Start > Settings > System > Screen > General.
2. Select an orientation.
3. Tap ok.
To correct screen alignment:
1. Tap Start > Settings > System > Screen > General.
2. Tap Align Screen.
3. Follow instructions on the screen.
4. Tap ok.
To soften fonts:
1. Tap Start > Settings > System > Screen > ClearType.
2. Select the Enable ClearType check box.
3. Tap ok.
24 Chapter 5 Get started with your HP iPAQ