User's Manual

Table Of Contents
3. Clear the Prompt if device unused for check box.
4. Tap ok and then tap Yes.
Use HP iPAQ Key Guard
The Key Guard program deactivates your HP iPAQ keys and touch screen to prevent accidental
activation of the HP iPAQ or any of its functions. When the display turns off or times-out as per the
backlight settings, this feature automatically locks your HP iPAQ. To set the backlight time-out, see
Adjust the brightness settings on page 25.
Press and hold the Key Guard button, the first button on the left panel, for two seconds to lock your
HP iPAQ. When your HP iPAQ is locked, the display dims and the Key Guard is on. Center Button:
To Unlock message is displayed on the screen. The display turns off after five seconds and your
HP iPAQ goes into sleep mode.
To unlock your HP iPAQ, press any key to activate your HP iPAQ from sleep mode, and then press the
Center Select button.
Alternatively, slide open the keyboard to unlock your HP iPAQ.
NOTE: To activate the Key Guard after you close the keyboard, press the Key Guard button or put
your device in the sleep mode.
NOTE: When you receive a call, the Key Guard remains active and allows you to answer the call.
To dial an emergency number when the Key Guard is active, enter the emergency number using the
keyboard with less than 5 seconds delay. Press the
(Answer/Send) key to place the call. You can
use the
(Backspace) key or the (End/Power) key to clear the digit(s) entered.
When you dial an emergency number, it is verified against the emergency number list in your SIM card
and the HP database registry. If the entered number is not recognized as an emergency number, you
will not be able to dial the number.
Use the device lock
The device lock feature locks your HP iPAQ to prevent any accidental key press. You can quickly lock
and unlock your HP iPAQ, from the Today screen, without a password.
NOTE: If this feature is not displayed on the Today screen, tap Start > Settings > Personal >
Today > Items, select the Device Lock check box, and then tap ok.
To lock your HP iPAQ:
On the Today screen, tap Device unlocked.
To unlock your HP iPAQ:
1. Tap Unlock at the bottom-left corner of the screen.
2. Tap Unlock at the center-right corner of the screen.
TIP: If you decide to keep your HP iPAQ locked, tap Cancel.
Use HP iPAQ Key Guard 29