User's Guide

IMPORTANT: Inserting a SIM card of the wrong size or inserting the SIM tray in the wrong direction could
damage the SIM card, damage internal components, or cause the SIM card to become stuck in the slot. Do not
use SIM card adapters. To prevent damage to the SIM tray and internal connectors of the tablet, use minimal
force when you insert or remove a SIM tray. Be sure to insert the SIM tray in the same orientation as it was
when you removed it.
NOTE: Before purchasing a SIM card, follow these instructions to determine the correct SIM card size for
your tablet:
1. Go to http://www.hp.com/support, and then search for your tablet by product name or number.
2. Select Product Information.
3. Refer to the listed options to determine which card to purchase.
1. Position the tablet display-side up on a at surface.
2. Use the tray eject tool provided with your tablet or insert a small straightened paper clip (1) into the
card tray access hole.
3. Press in gently to release the tray.
4. Holding the end of the tray, pull the tray (2) straight out from the tablet, and then insert the SIM card
(3).
NOTE: Be sure the tray access hole is aligned with the access hole on the tablet before replacing the
tray.
5. Replace the tray in the tablet with the same orientation as it was when you removed it. Press in gently
on the tray (4) until it is rmly seated.
To set your mobile network, see Setting your mobile network on page 20.
Setting your mobile network
Set your mobile network by following these steps:
1. Swipe down twice from the top edge, and then touch the Settings icon .
2. Under Network & Internet, touch More, and then touch Mobile Networks.
3. Touch Network operators, and then follow the on-screen instructions.
Activating tethering or a portable hotspot (select products only)
To activate USB tethering follow these steps.
20 Chapter 2 Network connections ENWW