User's Manual
Table Of Contents
- Get started with your HP iPAQ
- Home screen
- Getting Started
- Status icons
- Keyboard
- Center Select button
- Know your HP iPAQ
- Customize your HP iPAQ
- Use Key Guard
- Lock and unlock your HP iPAQ
- Use the SIM PIN to protect information on your HP iPAQ
- Battery saving tips
- HP Power Save Mode
- Use your HP iPAQ
- Call features
- Make calls
- Redial a number
- Answer calls
- Mute a call
- Put a call on hold
- Create an appointment during a call
- Use call waiting
- Make emergency calls
- Make calls using speed dial
- Make data calls
- Make a conference call
- Make a call from a hyperlinked phone number
- Make international calls
- Use voice mail
- Use the handsfree function
- Call history
- Voice commands
- Change the service settings
- Select a frequency band
- Voice notes
- Reset your HP iPAQ
- Call features
To disable the device lock on your HP iPAQ:
1. Press Start > Settings > Security > Device Lock.
2. Enter your password, and then press Unlock.
3. Clear the Prompt if device unused for check box.
4. Press Done, and then press Yes.
Use the SIM PIN to protect information on your HP iPAQ
Enable a Personal Identification Number (PIN) request on your HP iPAQ. Every time the HP iPAQ is
turned on, you will be prompted to enter the PIN before you can use your HP iPAQ.
To enable the PIN:
1. Press Start > Settings > Security > Enable SIM PIN.
2. Enter the PIN provided with your SIM card.
3. Press Done.
To change the PIN2:
1. Press Start > Settings > Security > Change PIN2.
2. Enter the Old PIN, and then enter the New PIN.
3. Enter the new PIN in Confirm new PIN to confirm the new PIN.
4. Press Done.
To disable the PIN:
1. Press Start > Settings > Security > Disable SIM PIN.
2. Enter your PIN.
3. Press Done.
Battery saving tips
Adjust the settings on your HP iPAQ to suit your needs and to help the device retain and increase the
charge retention capacity of the battery. Here are some recommendations to conserve battery life:
●
Turn off Bluetooth and Wi-Fi - Use Wireless Manager to turn off Bluetooth and Wi-Fi when not
in use. For more information see,
Use Wireless Manager on page 67.
●
Auto Turn Off the Backlight - Press Start > Settings > Power Management. Specify a short
amount of wait before turning off the backlight.
●
Disable Sounds - Every time you are notified of an event, battery power is consumed. Press Start
> Settings > Sounds to turn off any unnecessary notifications.
To check the battery power, press Start > Settings > Power Management, or look at
(Battery icon)
on the Home screen.
NOTE: If the battery drains out, you lose any unsaved data on your HP iPAQ. HP advises you to keep
your HP iPAQ fully charged at all times.
WARNING! Removing the battery from your HP iPAQ before turning it off might corrupt data on your
HP iPAQ.
24 Chapter 5 Get started with your HP iPAQ