User's Manual
Table Of Contents
- Get started with your HP iPAQ
- Home screen
- Getting Started
- Status icons
- Keyboard
- Center Select button
- Know your HP iPAQ
- Customize your HP iPAQ
- Use Key Guard
- Lock and unlock your HP iPAQ
- Use the SIM PIN to protect information on your HP iPAQ
- Battery saving tips
- HP Power Save Mode
- Use your HP iPAQ
- Call features
- Make calls
- Redial a number
- Answer calls
- Mute a call
- Put a call on hold
- Create an appointment during a call
- Use call waiting
- Make emergency calls
- Make calls using speed dial
- Make data calls
- Make a conference call
- Make a call from a hyperlinked phone number
- Make international calls
- Use voice mail
- Use the handsfree function
- Call history
- Voice commands
- Change the service settings
- Select a frequency band
- Voice notes
- Reset your HP iPAQ
- Call features
HP Power Save Mode
Activating the HP Power Save Mode, helps conserve your HP iPAQ battery power until the next
charging cycle. The HP Power Save Mode will become active when the battery reaches 25% of the full
charge level and a warning is displayed on the screen. If you cancel this warning, another warning is
displayed when the battery drains to 10% of the full charge level and the device goes into the HP Power
Save Mode.
When the device is in the HP Power Save Mode,
(Power Save Mode icon) is displayed at the top of
the screen.
HP Power Save Mode will automatically turn off after charging your battery above the 25% level, and
all the adjusted system settings will be restored.
To configure HP Power Save Mode:
1. Press Start > Settings >HP Power Save Mode.
2. Modify the settings to minimize power consumption and press Done.
To exit HP Power Save Mode:
1. Press Start > Settings > HP Power Save Mode.
2. Select Off, and then press Done.
NOTE: Another way to exit HP Power Save Mode is to follow the alert messages on your HP iPAQ
when it is in HP Power Save Mode.
HP Power Save Mode 25