User's Manual

To end a Wi-Fi connection:
1. Press the Wireless Manager link on the Home screen or press Start > Settings > Connections
> Wi-Fi.
2. Press Menu > Turn Off Wi-Fi.
Configuring 802.1x authentication settings
802.1x authentication settings provide a method to protect the network behind the access point from
intruders as well as provide for dynamic keys and strengthen Wi-Fi encryption. Before performing these
steps, determine if authentication information is needed by contacting your network administrator.
1. To manually enter information, press Start > Settings > Connections > Wi-Fi.
2. Select the network to configure, and then press Menu > Edit.
3. Press Next twice to reach the 802.1x screen. Select Use IEEE 802.1x network access control
check box, and then select appropriate EAP type.
Advanced settings
You need to specify advanced settings to connect to the Internet if your network is behind a firewall.
You also need to configure advanced settings to access secure intranet sites.
Connect to intranet URLs
To connect to intranet sites that have periods in their URLs (for example, intranet.companyname.com),
add them to the Work URL Exceptions list.
To connect to intranet URLs:
1. Press Start > Settings > Connections > Advanced.
2. Press Menu > Work URL Exceptions.
3. Press Menu > Add to add an intranet URL.
4. Enter the URL in the URL Pattern box, and then press Done.
NOTE: If you use many URLs that share the same root company name, avoid entering them
individually by entering *.companyname.com.
Change an intranet URL
To change an intranet URL:
1. Press Start > Settings > Connections.
2. Select GPRS, and then press Menu > Advanced.
3. Press Menu > Work URL Exceptions.
4. Highlight the intranet URL to change, and then press Menu > Edit.
5. Press Done.
NOTE: To delete a work URL exception, select it in the list, and then press Menu > Delete.
78 Chapter 13 Connections