User's Manual

Alternatively, you can also follow the steps given below to add a new Internet connection:
1. Press Start > Settings > Connections > GPRS.
2. Select New....
3. Edit the following information:
a. In the Description box, enter a name for the settings. This name is for your reference.
b. In the Connect to list, select The Internet.
c. In the Access point box, enter an access point name of the server to which you are attempting
to connect.
d. Enter the user name and password.
e. From the Authentication Type list, select the type of authentication.
f. In the Primary DNS box, enter the primary Domain Name Server (DNS) address provided by
your service provider.
g. In the Secondary DNS box, enter the secondary Domain Name Server (DNS) address
provided by your service provider.
h. In the IP address box, enter the IP address.
4. Press Done twice to confirm your settings.
Edit WAP information settings
To edit WAP information settings:
1. Press Start > Settings > Connections > GPRS.
2. Select the required operator name from the displayed list, and then press Menu > Edit.
3. Edit the following information:
a. In the Connects to list, select WAP Network.
NOTE: In the Connects to list, select Secure WAP Network to connect to a secure WAP
network.
b. In the Access point box, enter an access point name of the server to which you are attempting
to connect.
c. Enter the user name and password.
d. From the Authentication Type list, select the type of authentication.
e. In the Primary DNS box, enter the primary Domain Name Server (DNS) address provided by
your service provider.
f. In the Secondary DNS box, enter the secondary Domain Name Server (DNS) address
provided by your service provider.
g. In the IP address box, enter the IP address.
4. Press Done twice to confirm your settings.
Alternatively, you can also follow the steps given below to add a new WAP settings:
1. Press Start > Settings > Connections > GPRS.
2. Select New.
HSPA/GPRS/EDGE 69