User's Manual

3. Press Menu > Edit, and then select the Ring type.
4. Press Done.
TIP: You can also set profiles using Voice Commander. Press the Voice Commander button, or press
Start > Applications > Voice Commander and say Set profile. Then say the profile name.
Edit profiles
To edit a profile:
1. Press Start > Settings > Profiles.
2. Press Menu > Edit.
Select the following features in a profile to edit them:
●
Name
●
Ring type
●
Ring volume
●
Reminder type
●
Reminder volume
●
Notification type
●
Notification volume
●
System sound volume
3. Press Done.
Change the power management settings
Adjust the power management settings to conserve battery power. This increases the duration you can
use your HP iPAQ between charges.
To change the power management settings:
1. Press Start > Settings > Power Management.
2. The battery charge level is displayed under Main battery.
3. Highlight the listed settings and press the Center button to edit the power management settings:
●
Backlight time out on battery - Sets the time for dimming the backlight when your HP iPAQ
is using the battery.
●
Backlight time out on AC - Sets the time for dimming the backlight when your HP iPAQ is
connected to the AC power supply.
●
Display time out - Sets the time for the display to be switched off. Key Guard is activated
after the display turns off.
●
Keyboard Backlight time out - Sets the time for dimming the keyboard backlight when your
HP iPAQ is using the battery. You can set the backlight to time out after 4, 8, 12, 16, or 20
seconds.
Adjust the brightness settings
Increase or decrease the brightness of the display backlight.
20 Chapter 5 Get started with your HP iPAQ