User's Manual

Create a password to secure your Hawthorne
1. On the Home screen, press MENU on the keyboard, touch Settings, touch Security, and then
Create password.
2. In the Create password dialog box, type a password, re-enter the password, and then type a
password hint. Touch OK.
NOTE: Once a lock password is active, a password unlock window will appear each time your
Hawthorne screen turns on.
To unlock Hawthorne, press the BACK button and then enter your unlock password.
Disable password feature
1. On the Home screen, press MENU on the keyboard, touch Settings, touch Security, and then
touch Require password to uncheck.
NOTE: You can change the unlock password at any time by touching Change password and
entering new password information.
2. In the Confirm Password box, type the password, and then touch OK.
Using a Bluetooth device with Hawthorne
Turn on Bluetooth
1. On the keyboard, press Menu, and then touch Settings.
2. Touch Wireless controls, and then touch Bluetooth. Wait until Bluetooth is enabled, indicated
by the green checkmark.
Pair a stereo headset with your Hawthorne
1. Power up and turn on the stereo Bluetooth headset.
2. On the keyboard, press Menu, and then touch Settings.
3. Touch Wireless controls, and then touch Bluetooth settings.
4. Touch Scan for devices.
5. Touch your stereo headset from the list of choices.
6. If prompted, type in the PIN to pair the device, then touch the OK button. Once connected,
Connected to media audio will be displayed under the name of the Bluetooth device. If Paired
but not connected is displayed, touch the headset name again to connect it.
NOTE: Refer to the guide that was included with your Bluetooth stereo headset for information
regarding the device PIN.
8 Chapter 2 Getting Started