Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment

installation of HDLM continues, but installation of HDLM components has

failed. After installing HDLM, resolve the problem according to the

KAPL09241-W message if necessary.

9. Execute the following command to make sure that the package is installed.

# lslpp -la DLManager.mpio.rte

Make sure that the fileset item in the output listing contains

DLManager.mpio.rte, and all the displayed statuses are COMMITTED.

If one or more of the displayed statuses are

BROKEN, uninstall and then re-install

HDLM.

10. Unmount the DVD-ROM.

# umount /

cdrom

11. Delete the created mount directory.

# rm -r /

cdrom

12. As required, execute the dlmodmset utility for setting the HDLM execution

environment ODM.

For details, see 7.7 dlmodmset Utility for Setting the HDLM Execution

Environment ODM.

13. Execute the following command to configure the hdisk:

# cfgmgr

If the hosts and storage systems are connected by a Fibre Channel switch, perform

steps 14 to 18. If the hosts and storage systems are not connected by a Fibre

Channel switch, go to step 19.

14. Finish defining the parent device (

fscsin).

# rmdev -l fscsin -R

Note that you can use the following command to check the parent device:

# lsdev -C -l

hdisk-name -F 'parent'