Hitachi Dynamic Link Manager Software Users Guide for AIX (6.6) (T5208-96010, April 2011)

3. Creating an HDLM Environment



HTC_ODM 5.0.52.1 or later

If you are using the following storage systems, use HTC_ODM 5.0.52.1 or later:

• Hitachi AMS2000/AMS/WMS/SMS series

• Hitachi USP (excluding the HP XP series)

• Lightning 9900V series (excluding the HP XP series)

• Thunder 9500V series

• Universal Storage Platform V/VM (excluding HP XP20000 and HP

XP24000)

• Hitachi Virtual Storage Platform

Note:

When you install HTC_ODM in an HDLM environment where XP_ODM

has already been installed, install HTC_ODM, and then re-install HDLM.

 XP_ODM 5.0.52.1 or later

If you are using the following storage systems, use XP_ODM 5.0.52.1 or later:

• HP XP series

• P9500

Note:

When you install XP_ODM in an HDLM environment where HTC_ODM

has already been installed, install XP_ODM, and then re-install HDLM.

 JDK required for linkage with Global Link Manager

To link with Global Link Manager, make sure that JDK package 1.4.2 (32-bit

version) or later, JDK package 5.0 (32-bit version) or later, or JDK package 6.0

(32-bit version) or later is already installed on the host. The JDK does not need to

be installed if linkage with Global Link Manager is not used. When HDLM is

installed in an environment in which the JDK has not been installed, the

KAPL09241-W message is displayed. If linkage with Global Link Manager is not

used, this message requires no action. Note that the display of the KAPL09241-W

message does not affect HDLM operation.

3.1.2 Storage Systems Supported by HDLM

(1) Storage Systems

HDLM supports the following storage systems:

• Hitachi Universal Storage Platform V

• Hitachi Universal Storage Platform VM