HiCommand Dynamic Link Manager (HDLM) for Windows Systems User's Guide (HIT5201-96001, January 2008)

HiCommand
®
Dynamic Link Manager (HDLM) for Windows
®
Systems User’s Guide 101
Please update the Storport Miniport driver to a Storport.sys with a file version
n.n.nnnn.n or later.
– The PRSV key is registered before the installation finishes. If the KAPL09131-W
message appears, follow the procedure described in step 17.
16. Check the results of the installation.
If you performed an unattended installation, check the installation results in the
command prompt.
17. When the installation finishes, execute the dlmprsvkey utility with the -v parameter
specified. Make sure that the PRSV key displayed by the dlmprsvkey utility is unique
among those of any other hosts in the SAN. If the PRSV key is not unique or is not
registered, or if the KAPL09131-W message appears, execute the dlmprsvkey utility
with the -r parameter specified to re-register the PRSV key. If the PRSV key is not
registered, the HDLM functions may not operate normally. For details about the
dlmprsvkey utility, see section
8.4.
If you used the license key file, it will be deleted when the installation finishes. The
KAPL09115-W message appears if deletion of this file fails. In this case, delete the file
manually, such as by using Explorer.
18. Shut down the host. Leave the host in a single-path configuration until you check (in
step 25) whether HDLM has been successfully installed.
19. Modify the settings in the storage system. Modify the settings in the storage system
according to the procedure described in the hardware notes provided with HDLM.
20. Start the host individually.
21. Log on to the Windows system again as a member of the administrators group.
22. Make sure that the program is working normally, by examining the results of the
dlnkmgr command's view operation.