hp digital home networking phoneline gateway hn200p quick start guide Filename: QS Phoneline GW.doc Title: HP-Print2k.dot Template: HP Quick Start.
The Hewlett-Packard® Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard Company Home Networking Solutions Organization 3000 Hanover St Palo Alto, Ca 94304 The information in this document is subject to change without notice. © Hewlett-Packard Company, 2001. All rights reserved.
phoneline gateway hn200p Thank you for choosing the Hewlett-Packard Digital Home Networking Phoneline Gateway. This quick start guide provides easy set-up instructions. For additional information, see the user’s guide included on the CD-ROM.
before you begin ■ Has a phone line cable running from the adapter to a wall phone line jack. 1 Verify that all of the box contents are included. ■ Shares the same phone line. 2 Confirm that: ■ The computers you intend to connect to the Gateway are all running either Windows 98, 98SE, Me, 2000, or XP. Windows 2000 and XP Professional require administrative privileges to install this software — see your user documentation for details. ■ Each computer has a CD-ROM drive.
installing the phoneline gateway and connecting the first computer 4 The HP welcome screen appears: 1 Remove the CD-ROM from the box. 2 If the computer is off, turn it on. 3 Insert the CD-ROM into the CD-ROM drive of the computer that is connected to your broadband (cable or DSL) modem. Note: This screen appears only if Autorun is enabled. If you don’t see this screen, double-click My Computer. Right-click Compact Disc. Then click AutoPlay to launch the installed program.
5 Select installation. The installation wizard screen appears. 6 Follow the onscreen instructions to set up and configure the Phoneline Gateway, and to connect the cables. Select First PC when you are prompted to set up either a first PC or an additional PC. 7 You will be asked to make cable connections with all equipment powered on. This is necessary to interactively detect that each connection has been properly made. There is no danger to you or to your equipment. 4 Filename: QS Phoneline GW.
8 Use this diagram to help you connect the cables: phone line cable power adapter from phone PHONE DEVICE WALL HPNA WAN LAN UPLINK phone line cable to phone wall jack X DIRECT POWER RESET to AC wall outlet Ethernet cable Ethernet cable broadband modem first PC phoneline gateway Filename: QS Phoneline GW.doc Title: HP-Print2k.dot Template: HP Quick Start.
registering the phoneline gateway connecting the phoneline USB network adapter (optional) Make sure you register your product with HP after the installation process is complete. The registration option has been pre-selected for you. HP registration provides you with automatic notification of updates to the firmware installed on the Gateway and to the software installed on the PC. To provide you with an additional type of network cabling connection, a Phoneline USB Network Adapter is included in this kit.
3 Plug the Type B square end of the USB cable into the USB port of the adapter as illustrated in the following diagram: Type B square plug USB phone wall USB cable phone line cable to USB port on PC phone line cable to telephone wall jack Type A rectangular plug to a telephone handset phoneline gateway Filename: QS Phoneline GW.doc Title: HP-Print2k.dot Template: HP Quick Start.
4 Plug the Type A rectangular end of the USB cable into the USB port on the computer. 5 Plug one end of the phone line cable into the wall port on the adapter (see the cabling diagram shown previously). 6 Plug the other end of the phone line cable into a wall phone jack. installing the driver You must install the driver for each additional computer added to the network. 1 Turn on the computer and insert the CD-ROM into the CD-ROM drive of the computer. Note: If the HP welcome screen appears, click exit.
registering the network adapter connecting a phone to the network adapter Make sure you register your product with HP after the installation process is complete. Enter the following into the address window of your Web browser (such as Internet Explorer or Netscape): http://register.hp.com Connect a telephone to the phone port of the adapter as illustrated in the cabling diagram shown previously. Then press Enter. Caution: The phone port on the adapter does not contain a microfilter.
installing additional network computers accessing additional documentation 1 Turn on the computer to be connected and insert the CD-ROM in the CD-ROM drive. 1 Insert the CD-ROM into the CD-ROM drive of the computer. 2 Click documentation on the HP welcome screen. 2 When the HP welcome screen appears, click installation. 3 Follow the onscreen instructions. Select Add additional computer when you are prompted to install either a first PC or an additional PC.
product and support information ■ HP Customer Care: (208) 323-2551; http://www.hp.com/cposupport ■ Online product information and technical support: http://www.hp.com/go/ homenetworking (includes a home networking tutorial, FAQs, and other information) phoneline gateway Filename: QS Phoneline GW.doc Title: HP-Print2k.dot Template: HP Quick Start.