Quick start manual

6
Filename: QS Phoneline GW.doc Title: HP-Print2k.dot
Template: HP Quick Start.dot Author: Rob Heiret Last Saved By: Elizabeth Stoneburg
Revision #: 60 Page: 6 of 15 Printed: 08/16/01 05:39 PM
registering the phoneline
gateway
Make sure you register your product with HP
after the installation process is complete. The
registration option has been pre-selected for you.
HP registration provides you with automatic
notification of updates to the firmware installed
on the Gateway and to the software installed on
the PC.
If you choose to register your product at a later
date, enter the following into the address
window of your Web browser (such as Internet
Explorer or Netscape):
http://register.hp.com
Then press Enter.
connecting the phoneline USB
network adapter (optional)
To provide you with an additional type of
network cabling connection, a Phoneline USB
Network Adapter is included in this kit. You can
add the network adapter after you have installed
the Phoneline Gateway and the first computer.
You can use the network adapter to:
■
Change the first computer to a phone line
connection instead of an Ethernet
connection.
■
Connect the second (or any additional)
computer to the network.
1 To connect an additional computer, skip to
step 2. To change the first computer to a
phone line connection instead of an Ethernet
connection, disconnect the Ethernet cable
between the first computer and the Phoneline
Gateway.
2 Turn off the computer.