HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Application Guide

Remote monitoring
162
Configuring RMON Events (CLI example)
1. Configure the RMON Event parameters.
>> /cfg/rmon/event 5 (Select RMON Event 5)
>> RMON Event 5# descn "SYSLOG_generation_event"
>> RMON Event 5# type log
>> RMON Event 5# owner “Owner_event_5”
2. Apply and save the configuration.
>> RMON Alarm 5# apply (Make your changes active)
>> RMON Alarm 5# save (Save for restore after reboot)
This configuration creates an RMON event that sends a SYSLOG message each time it is triggered by an
alarm.
Configuring RMON Events (BBI example)
1. Configure an RMON Event group.
a. Click the Configure context button.
b. Open the Switch folder, and select RMON > Event > Add Event Group.
c. Configure RMON Event Group parameters. This configuration creates an RMON event that
sends a SYSLOG message each time it is triggered by an alarm.