HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Application Guide

VLANs
64
b.
Enter the VLAN name, VLAN ID number, and enable the VLAN. To add ports, select each port in
the Ports Available list and click Add. Since all ports are configured for VLAN 1 by default,
configure only those ports that belong to VLAN 2. The crosslink port 17 must belong to VLAN 1
and VLAN 2.
c. Click Submit.
The external Layer 2 switches should also be configured for VLANs and tagging.
3. Apply, verify, and save the configuration.