HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-based Interface Reference Guide

Configuring the switch
162
Table 107 Switch Port ACL Configuration controls
Control Description
ACL Groups Selected Lists the ACL Groups associated with the port.
Select an ACL Group number in the ACL Groups Available list, and click Add to add the
ACL Group to the port.
Select an ACL Group number in the ACL Groups Selected list, and click Remove to
remove the ACL Group from the port.
Port-Based Port Mirroring Configuration
To display the following form, select Port-Based Port Mirroring (click the underlined text, not the
folder).
This form is used to configure, enable, and disable the Monitoring Port. When enabled, network packets
being sent and/or received on a target port are duplicated and sent to a monitor port. By attaching a
network analyzer to the monitor port, you can collect detailed information about your network
performance and usage.
The following table describes the Port-Based Port Mirroring Configuration controls:
Table 108 Port-Based Port Mirroring Configuration controls
Control Description
Enable Port-Based Port Mirroring? Enables or disables port mirroring on the switch. Port mirroring is disabled by
default.
Monitoring Port Selects a port number to configure the port as a monitoring port.
Mirrored Ports Displays the port(s) currently mirrored for each monitoring port.