HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-based Interface Reference Guide

Configuring the switch
195
IP Static Routes Configuration
To display the following form, select Layer 3 > Network Routes (click the underlined text, not the
folder).
This form summarizes static route parameters.
The following table describes IP Static Routes Configuration controls:
Table 135 IP Static Routes Configuration controls
Control Description
Search Operation To focus the search for an IP static route, enter search parameters:
• Static Route ID
• Destination IP address and subnet mask
• Gateway IP address and subnet mask
Fields that have a value of “any” are ignored during the search.
Choose a search operation:
• or: Search for IP static routes specified in the Search range that meet any of the
criteria entered.
• and: Search for IP static routes specified in the Search range that meet all of the
criteria entered.
Click Search to display IP static routes that fit the range and meet the criteria entered.