HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-based Interface Reference Guide

Configuring the switch
196
IP Static Route Configuration
To display the following form, go to the IP Static Routes Configuration form. Select a static route ID
number, or open the Network Routes folder and click Add Network Route.
The following table describes the IP Static Route Configuration controls:
Table 136 IP Static Route Configuration controls
Control Description
Route Table Index (1-128) Sets the numeric identifier for this index.
Destination IP Enter the destination IP address for this route.
Mask Enter the subnet mask for this route.
Gateway Enter the IP address of the gateway associated with this route.
Interface Number (1-256| 0 for none) Assigns an interface number to this route.