HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-based Interface Reference Guide

Configuring the switch
202
Route Map Access List Configuration
To display the following form, go to the Route Map Configuration form. Click Add Access List.
The following table describes the Access List Configuration controls:
Table 142 Access List Configuration controls
Control Description
Access List Identifier (1-8) Assigns the access list number.
Network Filter (0-256, 0=none) Sets the network filter number associated with the access list.
Metric (1-4294967295, 4294967295=none) Sets the metric value in the AS-External (ASE) LSA.
Action Permits or denies action for the access list.
Enabled? Enables or disables the access list.