HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-based Interface Reference Guide

Configuring the switch
207
Table 145 IGMP Snooping Configuration controls
Control Descriptions
Snooping VLANs with
Fstleave
Enables or disables FastLeave processing. FastLeave allows the switch to
immediately remove a port from the IGMP port list, if the host sends a Leave
message, and the proper conditions are met. This command is disabled by default.
Add: Adds selected VLANs to the Snooping VLANs with Fstleave list. To add a
VLAN, select the VLAN in the Snooping VLANs without Fstleave list, and click Add.
Remove: Removes selected VLANs from the Snooping VLANs with Fstleave list.
IGMP Filters Configuration
To display the following form, select Layer 3 > IGMP > IGMP Filters (click the underlined text, not the
folder).
This form summarizes IGMP filter parameters. Use IGMP filters to allow or deny a port to send and
receive multicast traffic.