HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-based Interface Reference Guide

Configuring the switch
213
OSPF MD5 Key Configuration
To display the following form, go to the OSPF General Configuration form. Click Add OSPF Mdkey.
The following table describes the OSPF MD5 Key Configuration controls:
Table 150 OSPF MD5 Key Configuration controls
Control Descriptions
ID Displays a numeric identifier for the MD5 authentication key.
MD5 Key Assigns a string to the MD5 authentication key.
OSPF Areas Configuration
To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Areas (click the
underlined text, not the folder).
This form provides a summary of the state of OSPF areas. Select an area number to view the OSPF Area
Configuration form.