HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-based Interface Reference Guide

Configuring the switch
216
OSPF Summary Range Configuration
To display the following form, go to the OSPF Summary Ranges Configuration form. Select a summary
range number, or open the OSPF Summary Ranges folder and click Add Summary Range.
The following table describes the OSPF Summary Range Configuration controls:
Table 152 OSPF Summary Range Configuration controls
Control Descriptions
Range Number (1-16) Assigns a numeric identifier to the OSPF summary range.
Enabled? Enables or disables the OSPF summary range.
Hide Range Hides or shows the OSPF summary range.
Area number (0-2) Defines the area index used by the switch.
IP Address Defines the base IP address for the range.
Subnet Mask Defines the IP address mask for the range.