HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-based Interface Reference Guide

Configuring the switch
232
VRRP Interface Configuration
To display the following form, go to the Virtual Routers Configuration form. Select a VRRP interface
number or open the VRRP Interfaces folder and click Add Virtual router Interface.
The following table describes the VRRP Interface Configuration controls:
Table 166 VRRP Interface Configuration controls
Control Descriptions
IP Interface (1-256) Defines the IP interface.
Authentication? Defines the type of authentication that will be used: none (no authentication), or
password (password authentication).
Password Defines a plain text password up to eight characters long. This password will be
added to each VRRP packet transmitted by this interface when password
authentication is chosen (see Authentication above).