HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-based Interface Reference Guide

Configuring the switch
244
Table 176 Access Control List Configuration controls
Control Description
Tagging Packet Format Defines the tagging format for the ACL.
Source MAC Address Defines the source MAC address for this ACL.
Destination MAC Address Defines the destination MAC address for this ACL.
Ethernet Type Defines the Ethernet type for this ACL.
VLAN ID (1-4095) Defines a VLAN number and mask for this ACL.
802.1p Priority Defines the 802.1p priority for the ACL.
Type of Service (0-255) Defines a Type of Service value for the ACL. For more information on ToS, see RFC
1340 and 1349.
Protocol (0-255) Defines an IP protocol for the ACL. If defined, traffic from the specified protocol
matches this filter. Specify the protocol number. Some of the well-known protocols
include:
• 1—icmp
• 2—igmp
• 6—tcp
• 17—udp
• 89—ospf
• 112—vrrp
Source IP Address Defines a source IP address for the ACL. If defined, traffic with this source IP address
will match this ACL. Specify an IP address in dotted decimal notation.
Destination IP Address Defines a destination IP address for the ACL. If defined, traffic with this destination IP
address will match this ACL.
TCP/UDP Src Port (1-65535) Defines a source port for the ACL. If defined, traffic with the specified TCP or UDP
source port will match this ACL. Specify the port number. Some of the well-known
ports include:
20—ftp-data
21—ftp
22—ssh
23—telnet
25—smtp
37—time
42—name
43—whois
53—domain
69—tftp
70—gopher
79—finger
80—http
TCP/UDP Dst Port (1-65535) Defines a destination port for the ACL. If defined, traffic with the specified TCP or
UDP destination port will match this ACL. Specify the port number, just as with
sport above.
TCP Flags Defines a TCP/UDP flag for the ACL.