HP 1:10Gb Ethernet BL-c Switch for c-Class BladeSystem Browser-based Interface Reference Guide

Dashboard
69
RIP Interfaces Dashboard
To display the following form, select Layer 3 > RIP > RIP Interfaces (click the underlined text, not the
folder).
The following table describes the RIP Interfaces Dashboard controls:
Table 45 RIP Interfaces Dashboard controls
Control Description
Search Range To search for a RIP interface, enter a range of interface ID numbers in the From and To fields.
Search Options To focus the search for a RIP interface, enter optional search parameters:
• RIP version
• RIP state
Fields that have a value of “any” are ignored during the search.
Choose a search operation:
• or: Search for RIP interfaces specified in the search range that meet any of the criteria
entered.
• and: Search for RIP interfaces specified in the search range that meet all of the criteria
entered.
Click Search to display RIP interface that fit the range and meet the criteria entered.
Interface ID Displays each interface number.
RIP State Displays the current status of RIP in the interface: enabled or disabled.
RIP Version Displays the RIP version used by the interface.
Default Action Displays the default action for RIP on the interface.
Supply Updates Displays the current status of Supply: enabled or disabled.
Listen to Updates Displays whether Supply Updates is enabled or disabled.