HP 1:10Gb Ethernet BL-c Switch User Guide

Technical specifications 25
Technical specifications
General specifications
Category Specification
Standards: IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Ethernet
IEEE 802.3z 1000Base-SX Ethernet
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1Q VLAN
IEEE 802.3ac Frame Extensions for VLAN
IEEE 802.3ad Link Aggregation Protocol (No LACP support)
IEEE 802.3x Full-Duplex Flow Control
ANSI/IEEE 802.3 Nway Auto-Negotiation
Protocols: CSMA/CD
Data transfer rates:
Ethernet Half-Duplex: 10 Mb/s
Full-Duplex: 20 Mb/s
Fast Ethernet Half-Duplex: 100 Mb/s
Full-Duplex: 200 Mb/s
Gigabit Ethernet Half-Duplex: 1000 Mb/s
Full-Duplex: 2000 Mb/s
10Gb Ethernet Half-Duplex: 10000 Mb/s
Full-Duplex: 20000 Mb/s
Connectors:
HP 1:10Gb Ethernet BL-c
Switch
4 RJ-45, 1 DB-9, 2 10 Gb XFP, 1 10 Gb CX4
10Base-T Two Pair UTP Category 3, 4, 5 (100 m)
EIA/TIA-568 100-ohm STP (100 m)
100Base-TX Two Pair or Four Pair UTP Category 5 (100 m)
EIA/TIA-568 100-ohm STP (100 m)
1000Base-T Four Pair UTP Category 5e (100 m)
EIA/TIA-568 100-ohm STP (100 m)
10 Gb multimode fiber cable 62.5/125 or 50/125 microns