HP 1:10Gb Ethernet BL-c Switch User Guide

Technical specifications 27
Port type Port number Port name STP
Server 10 Downlink10 Disabled
Server 11 Downlink11 Disabled
Server 12 Downlink12 Disabled
Server 13 Downlink13 Disabled
Server 14 Downlink14 Disabled
Server 15 Downlink15 Disabled
Server 16 Downlink16 Disabled
X-Connect 17 XConnect1 Enabled
Mgmt 18 Mgmt Enabled
Uplink 19 Uplink1 Enabled
Uplink 20 Uplink2 Enabled
Uplink 21 Uplink3 Enabled
Uplink 22 Uplink4 Enabled
Uplink 23 Uplink5 Enabled
Uplink 24 Uplink6 Enabled
Uplink 25 Uplink7 Enabled
Runtime switching software default settings
General default settings
Setting Value
Notice None
Banner None
User names and passwords User names and passwords:
•
user—Enabled, password is user
•
oper—Disabled, no password
•
admin—Enabled (cannot be disabled), password is
admin
BOOTP service Enabled
IP address (if manual IP option is selected) 0.0.0.0
Subnet mask (if manual IP option is
selected)
0.0.0.0
Primary default gateway 0.0.0.0
Secondary default gateway 0.0.0.0
Primary DNS server address 0.0.0.0
Secondary DNS server address 0.0.0.0
Default domain name None
Management network/mask 0.0.0.0 / 0.0.0.0
Switch software image on next boot Image 1