HP Virtual Connect Manager Version 1.10 Release Notes

Hardware and firmware requirements 4
Hardware and firmware requirements
In this section
Supported hardware................................................................................................................................. 4
Firmware upgrade requirements................................................................................................................. 4
Supported hardware
This version of HP Virtual Connect Manager v1.10 firmware supports the following hardware:
• Virtual Connect modules
o HP 1/10Gb Virtual Connect Ethernet Module
o HP 4Gb Virtual Connect Fibre Channel Module
• Server blades
o HP ProLiant BL460c Server Blade
o HP ProLiant BL480c Server Blade
o HP ProLiant BL465c Server Blade
o HP ProLiant BL685c Server Blade
• HP BladeSystem c-Class c7000 Enclosure with Onboard Administrator
• Mezzanine cards
o HP BladeSystem Dual NC370i Multifunction Network Adapter
o HP NC373i Integrated Multifunction Gigabit Server Adapter
o HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
o HP NC326i Integrated Dual Port PCI Express Gigabit Server Adapter
o HP NC326m PCI Express Dual Port Multifunction Gigabit Server Adapter
o HP NC325m PCI Express Quad Port Gigabit Server Adapter
o HP QLogic QMH2462 4Gb FC HBA for c-Class BladeSystem
The HP Emulex LPe1105-HP 4Gb FC HBA mezzanine card is not supported in this release. For the latest
list of supported hardware, see the HP website (http://www.hp.com/go/bladesystemupdates
).
Firmware upgrade requirements
IMPORTANT: For compatibility and proper operation of HP Virtual Connect Manager, all
system firmware must be current.
Always install the most current firmware for the following items:
• Server blade system ROMs
• Ethernet mezzanines