HP Virtual Connect Manager Version 1.15a Release Notes

Hardware and firmware requirements 4
Hardware and firmware requirements
In this section
HP Virtual Connect Manager firmware ....................................................................................................... 4
Supported hardware................................................................................................................................. 4
Firmware upgrade requirements................................................................................................................. 5
HP Virtual Connect Fibre Channel Module Compatibility Matrix ....................................................................6
HP Virtual Connect Manager firmware
The latest HP Virtual Connect Manager firmware package (version 1.15a) contains the following firmware
versions:
• HP 1/10Gb VC-Enet version 1.15
• HP 4Gb VC-FC version 1.02
IMPORTANT: The VC-Enet module firmware must be updated to version 1.15 before updating
the VC-FC module firmware. Otherwise, the VC-FC firmware might not appear to be
successfully updated.
Supported hardware
Versions 1.15 and 1.15a of HP Virtual Connect firmware support the following hardware:
• Virtual Connect modules
o HP 1/10Gb Virtual Connect Ethernet Module
o HP 4Gb Virtual Connect Fibre Channel Module
• Server blades
o HP ProLiant BL460c Server Blade
o HP ProLiant BL480c Server Blade
o HP ProLiant BL465c Server Blade
o HP ProLiant BL685c Server Blade
• HP BladeSystem c-Class c7000 Enclosure with Onboard Administrator
• Integrated Network Interfaces and mezzanine cards
o HP BladeSystem Dual NC370i Multifunction Network Adapter
o HP NC373i Integrated Multifunction Gigabit Server Adapter
o HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
o HP NC326i Integrated Dual Port PCI Express Gigabit Server Adapter
o HP NC326m PCI Express Dual Port Multifunction Gigabit Server Adapter
o HP NC325m PCI Express Quad Port Gigabit Server Adapter