10 Gigabit Ethernet Host Channel Adapters - Read This First: Documentation Roadmap

Firmware and Drivers
To update firmware for the Mellanox ConnectX HCAs used in HP 10 Gigabit Ethernet
configurations, click the Support & Drivers
tab on the hp.com website. Follow the steps to select the
firmware by your operating system type using the HP part number.
Be sure to read and follow the installation instructions provided on the firmware download page to
ensure that the correct firmware image is downloaded for your specific HCA type.
The table below provides direct links to firmware images on the HP website:
HP Part Number Firmware Download Link
516937-B21
Firmware
516936-B21
Firmware
You can also access the firmware updates from Mellanox. The following table provides a link to
access the updates from Mellanox.
Firmware Link
Updating Firmware for an HP 10 Gigabit Ethernet Adapter Firmware
The following tables provide links to the Mellanox website to access the drivers for the Mellanox
ConnectX based HCAs used in HP 10 Gigabit Ethernet configurations.
Mellanox Drivers Link
10 Gigabit Ethernet Software Drivers
NOTE: For technical support and updates, contact your HP representative.
5