- HP 10000 G2 Series Rack Options Installation Guide

Ground Bonding kit 50
a.
Unlock and open the front door.
b. Lift the top hinge pin up, and tilt the door away from the rack.
c. Lift the door up and out of the bottom hinge.
2. Insert an M6 T-25 Torx screw through one end of a 15.24-cm (6-in) grounding strap, and insert it in the
second hole below the upper front door hinge on the vertical frame member of the rack. Tighten the
screw.
3. Replace the rack front door.