- HP 10000 G2 Series Rack Options Installation Guide

Ground Bonding kit 60
3.
Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the extension
kit and tighten.
4. Repeat the previous steps for the opposite side of the rack.
From the extension kit to the top rack side panel:
1. Insert a T-25 Torx screw through the end of the 36.83-cm (14.5 in) grounding strap, and secure it to the
top side panel.
2. Place the other end of the same grounding strap over the grounding lug on the extension kit.