- HP 10000 G2 Series Rack Options Installation Guide

Rack Air Duct kit 86
Rack Air Duct kit
About this kit
The HP 10000 G2 Rack Air Duct kit removes warm air from the rack by channeling the warm air into the data
center ceiling return air plenum. The air duct sits on top of the rack, directly joined to the ceiling plenum,
preventing the warm air from entering the data center aisle.
Three kits support this product.
Part number Option kit name Description
AF028A
HP 10642G2 Top Exhaust Extension
Kit
This kit includes the rear extension assembly and rack
air duct assembly.
AF029A
HP 10642G2 Top Exhaust Field Retrofit
Kit
This kit includes a solid top and bottom rack plate, solid
rear rack doors, and an airflow gasket, enabling you
to convert your existing HP rack to accommodate the
rack air duct assembly.
AF030A
HP 10642G2 Top Exhaust Rack This factory custom-to-order rack arrives with a solid
top and bottom rack plate preinstalled on the rack.
If you are converting your current HP rack to accommodate the HP 10000 G2 Rack Air Duct, you must install
the AF029A kit prior to installing the AF028A kit.
If you ordered the AF030A rack, you must install the AF028A kit to the AF030A rack.
Kit contents
The following items are included in your rack option kit:
AF028A HP 10642G2 Top Exhaust Extension Kit
• Extension assembly
o Extension left side (1)
o Extension right side (1)
o Extension top (1)
o Extension base (1)
o M5.5 self-tapping screw (6)
o M6 machine screw (8)
• Air duct assembly
o Upper air duct assembly (1)
— M6 cap screw (4)
— M6 star washer (4)
— M6 flat washer (4)
— M6 nut (4)