HP 10Gb Ethernet BL-c Switch Browser-based Interface Reference Guide

Configuring the switch
193
LACP Configuration
To display the following form, select Layer 2 > LACP.
The following table describes the Switch LACP Configuration controls:
Table 126 Switch LACP Configuration controls
Control Description
LACP System Priority (1-65535) Defines the priority value (1 through 65535) for the switch. Lower numbers
provide higher priority. The default value is 32768.
Timeout time Defines the timeout period before invalidating LACP data from a remote
partner. Choose short (3 seconds) or long (90 seconds). The default value is
long.
NOTE: HP recommends that you use a timeout value of long, to reduce
LACPDU processing. If your switch’s CPU utilization rate remains at 100% for
periods of 90 seconds or more, consider using static trunks instead of LACP.