HP 10Gb Ethernet BL-c Switch Browser-based Interface Reference Guide

Configuring the switch
218
IGMP Filter Configuration
To display the following form, go to the IGMP Filters Configuration form. Select a Filter ID, or open the
IGMP Filters folder and click Add Filter.
The following table describes the IGMP Filter Configuration controls:
Table 148 IGMP Filter Configuration controls
Control Description
Filter Identifier (1 - 16) Selects an IGMP filter to configure.
Enabled? Enables or disables this IGMP filter.
Range 1 IP Multicast Address Configures the start of the range of IP multicast addresses for this filter.
Range 2 IP Multicast Address Configures the end of the range of IP multicast addresses for this filter.
Action Allows or denies multicast traffic for the IP multicast address range specified.