HP 10Gb Ethernet BL-c Switch Browser-based Interface Reference Guide

Configuring the switch
222
OSPF General Configuration
To display the following form, select Layer 3 > OSPF Routing Protocol > General.
The following table describes the OSPF General Configuration controls:
Table 151 OSPF General Configuration controls
Control Descriptions
Globally Enable OSPF? Enables or disables OSPF.
External LSDB Limit (0-2000) Sets the link state database limit. Enter zero (0) to indicate that
there is no limit.
Default Route Metric (1-16777215, 0=none) Sets one default route among multiple choices in an area.
Default Route Metric Type
Sets the default-route metric type. Enter none to indicate that
there is no default.