HP 10Gb Ethernet BL-c Switch Browser-based Interface Reference Guide

Configuring the switch
231
OSPF Hosts Configuration
To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Hosts (click the
underlined text, not the folder).
The following table describes OSPF Hosts Configuration controls:
Table 158 OSPF Hosts Configuration controls
Control Description
Search Operation To focus the search for an OSPF host, enter search parameters:
• Host ID
• IP address and subnet mask
• Area number
• State
Fields that have a value of “any” are ignored during the search.
Choose a search operation:
• or: Search for OSPF hosts specified in the Search range that meet any of the criteria
entered.
• and: Search for OSPF hosts specified in the Search range that meet all of the
criteria entered.
Click Search to display OSPF hosts that fit the range and meet the criteria entered.