HP 10Gb Ethernet BL-c Switch Browser-based Interface Reference Guide

Configuring the switch
233
OSPF Route Redistribution Configuration
To display the following form, select Layer 3 > OSPF Routing Protocol > OSPF Route
Redistribution > Static Route Redistribution, Fixed Route Redistribution, or RIP Route
Redistribution.
The following table describes the OSPF Route Redistribution Configuration controls:
Table 160 OSPF Route Redistribution Configuration controls
Control Descriptions
Metric (1-16777215, 0=none) Exports the routes of this protocol as external OSPF AS-external LSAs in which the
metric and metric type are specified. To remove a previous configuration and stop
exporting the routes of the protocol, enter none.
AS External Metric Type Exports the routes of this protocol as external OSPF AS-external LSAs in which the
metric and metric type are specified. To remove a previous configuration and stop
exporting the routes of the protocol, enter none.
Route Maps Available Lists the route maps that can be added to the list of OSPF static route.
Out Route Map List Lists the route maps that are members of the OSPF static route.
Select a route map number in the Route Maps Available list and click Add to add
the route map to the list of static routes.
Select a route map number in the Out Route Map list and click Remove to remove
the route map from the list of static routes.