HP 10Gb Ethernet BL-c Switch Browser-based Interface Reference Guide

Dashboard
29
SFP Information
To display the following form, select System > SFP.
The following table describes the status of each Small Form Pluggable (SFP or XFP) module on each fiber
external port.
Table 10 SFP Information
Control Description
Port Displays the port number and SFP/XFP number.
Device Displays the transmission media and device type for the port, as
follows:
• Media:
CU = Copper SFP
FI = Fiber SFP
SR = Short Range XFP
LR = Long Range XFP
• Device: SFP or XFP module
TX-Enable Displays the transmission status of the module (enabled or disabled).
RX-Signal Displays the link state of the module port (OK or LOST).
TX-Fault Displays the fault status of the module (none or FAULT).