HP 10Gb Ethernet BL-c Switch Browser-based Interface Reference Guide

Dashboard
39
Table 17 Switch Spanning Tree Groups Information controls
Control Description
Search Options To focus the search for a Spanning Tree Group, enter optional search parameters:
• Bridge Priority
• Spanning Tree State
Fields that have a value of “any” are ignored during the search.
Choose a search operation:
• or: Search for spanning tree groups specified in the search range that meet any
of the criteria entered.
• and: Search for spanning tree groups specified in the search range that meet
all of the criteria entered.
Click Search to display spanning tree groups that fit the range and meet the
criteria entered.
Spanning Tree Group Displays the numeric identifier of the Spanning Tree Group.
State Shows if Spanning Tree is turned on or off for the port.
Bridge Priority Controls which bridge on the network will become the STP root bridge.
This command does not apply to MSTP.
Bridge Hello Time Specifies, in seconds, how often the root bridge transmits a configuration bridge
protocol data unit (BPDU). Any bridge that is not the root bridge uses the root
bridge hello value.
This command does not apply to MSTP.
Bridge Max Age Specifies, in seconds, the maximum time the bridge waits without receiving a
configuration bridge protocol data unit before it reconfigures the STP network. If the
bridge is not the root bridge, it uses the MaxAge value of the root bridge.
This command does not apply to MSTP.
Bridge Forward Delay Specifies, in seconds, the amount of time that a bridge port has to wait before it
changes from learning state to forwarding state. If the bridge is not the root bridge,
it uses the Forward Delay value of the root bridge.
This command does not apply to MSTP.
Bridge Aging Time Specifies, in seconds, the amount of time the bridge waits without receiving a
packet from a station before removing the station from the Forwarding Database.
Select a Spanning Tree Group number to display detailed information.