HP 10Gb Ethernet BL-c Switch User Guide

Performing a serial download 41

Using the null modem cable, connect the console port of the switch to the serial port of a PC that

supports XModem/1K XModem.

2. Start HyperTerminal (part of Microsoft Windows) or equivalent terminal emulation application

(depending on the computer operating system) and set the parameters for terminal emulation

console:

Parameter Value

Baud rate 9600

Data bits 8

Parity None

Stop bits 1

Flow control None

3. Power on the switch.

4. Hold down the Shift key and press the D key repeatedly during the Memory Test, until this message

appears:

NOTE: To perform serial downloads at 57600 baud rate, press the Shift-F keys. To perform

serial downloads at 115200 baud rate, press the Shift-D keys.

5. After the message in Step 4 appears, reconfigure the terminal emulation console using these

parameters.

Parameter Value

Baud rate 115200