HP 10GbE Pass-Thru Module User Guide

Component identification 7
Component identification
10GbE Pass-Thru Module front panel
CAUTION: If you press the Reset button while the Health LED is green, the pass-thru module
resets.
Item Description
1 UID LED
•
Blue light on—The pass-thru module is activated.
•
Blue light off—The pass-thru module is deactivated.
2 Health LED
•
Off—The pass-thru module is powered off.
•
Green—The pass-thru module is powered up, and all ports
match.
•
Amber—An issue exists, such as a port mismatch. For more
information, see the HP BladeSystem Enclosure Setup and
Installation Guide.
3 Ethernet port
•
Green—Link is 10G.
•
Flashing green—10G link activity is detected.
•
Amber—Link is 1G.
•
Flashing amber—1G link activity is detected.
•
Flashing alternately green and amber—A link mismatch
condition exists. For more information, see the HP BladeSystem
Enclosure Setup and Installation Guide.