Medical Archive Solutions User Guide

161
HP Medical Archive
Configuration
DICOM
DICOM is optional
on the HPMA.
This component provides a check box to reset the DICOM event
counters. This can be used to clear alarm conditions.
HTTP
This component provides a check box to reset the HTTP event
counters. This can be used to clear alarm conditions.
Connectivity
There are no configurable settings offered for this component.
CMN Configuration
The CMN Configuration X Main page offers the standard service
settings to change the labeling of the service and add notations, see
Table 60 on page 158.
The Configuration Management Node (CMN) service is used to make config-
uration settings on a system-wide basis, for protocol handling and network
permissions. Access to the settings for components of this service is restricted
to the Vendor account. Details are not included in this guide.
Table 61: CLB
X DICOM Component Configuration Settings
Prompt Type Description
Reset DICOM
Counts
Check box When selected and applied, all counter attributes of
the CLB DICOM incoming and outgoing associations
are reset to zero.
Table 62: CLB X DICOM Component Configuration Settings
Prompt Type Description
Reset HTTP
Counts
Check box When selected and applied, all counter attributes of
the CLB HTTP sessions are reset to zero.